Gorn Masks and Dragon Heads

A few years ago I made a replica of the mask used to portray the monstrous "Gorn" in the classic Star Trek episode "Arena", where he matched wits and brawn with the formidable force of nature known as William Shatner. My Gorn mask was built according to my personal opinions of how the original mask was constructed, as there is very little info on the subject.
You can read about the making of my Gorn mask here:
http://loneanimator.blogspot.se/2011/09/wrestling-with-gorn.html
The mask was actually eventually sold to Bobby Clark, the stuntman who played the monster. Bobby is now touring Trek conventions displaying my mask as the best replica he's seen, and he should know since he spent several days encapsulated in the hot rubber suit.

Here's Bobby with my mask at the actual location where "Arena" was filmed. I guess that's kind of cool!

Bobby had some reservations about my version, as the original was apparently bigger, and the eyes were covered with glittery sequins. I haven't been able to find any sequins as small as they appear to be in the stills from the episode, but there might've been a sequin of that type in the 1960's. Maybe the Trek costume department had the stuff on hand.

My old Gorn mask seems to be worn out and Bobby contacted me to ask me to make a new copy. Ideally, a new bigger version would've been much better, and I am actually working on that now, but to meet Bobby's convention schedule, a copy of the old version will have to do. So I recently sent a new Gorn mask off to him, along with a plastic baby hatchling. You can read about the making of the Gorn baby here:
http://loneanimator.blogspot.se/2011/09/making-gorn-baby.html
Now, is making copies of monsters someone else has designed and established a fun job? Not really, although it seems to be a popular way of making a name for yourself as a creative person. I see many wonderfully made replicas of the Alien, the Predator, and other famous movie monsters. But  I'd much rather  make my name doing my own thing.
It's surprisingly hard work copying what what's been done before, and the simpler the design, the harder it is to get it right. Just try to draw Donald Duck off the top of your head. I'm trying to do less of this kind of work, though getting an order from an old monster performer is flattering and hard to say no to.

During the past four months I've been juggling four part-time jobs. I wouldn't recommend it, as I came very close to experiencing a burnout. I have friends who have gone through this ordeal, and it's no joke. One of my jobs was building props for the outdoor stage show "The Brothers Lionheart", based on a very popular Swedish children's book. I made plastic helmets, rubber spear tips, and similar stuff, but the main big thing was creating the paw and huge head of the dragon Katla. The production team bought a previously used fiberglass dragon head from another stage show. This head was very poorly detailed, and my job was to build up a completely new surface on it. This entailed mixing sculpted and cast skin pieces with structures built up directly on the fiberglass surface. I actually used a thick acrylic paint mixed with cotton to create Katla's new skin, and the result was a very durable, leathery structure.

Here's the Katla head with a new lick of paint, but still not quite finished.

Katla in action during the show. A smoke gun located in the mouth and nostrils  provided necessary dragon ambiance, along with loud sound effects and dramatic music. Apparently Katla's a success with the audiences.

This is my last stage production. I've made a loooooot of them, starting when I was 13, creating props and masks for a fairy tale show. It's always hard work, but usually there's also lots of fun. Now, the fun seems to have gone out of the equation, and it's just work for me. As success coach Brian Tracy says, "if you're stuck in a job you don't like, get out of that job as you would get out of a burning house." And as the old Klingon proverb goes, "only a fool fights in a burning house."
For the sake of reducing stress and disappointment in my life I've now learnt to use the most powerful word there is: "NO!" Now I say no to all offers of working on stage productions. Instead I'm focusing all my efforts on my personal work, i e my miniature animation work, with occasional props and masks created for my own films, or for projects of close friends. If I can't use my creativity to put joy into my life, then what good is it for? I've no idea if my personal work will ever result in any sort of monetary success, but now that seems unimportant. I'm more concerned with what kind of legacy I can leave behind, and I'd rather realize my own ideas than someone else's. I've heard people say that's a pompous and presumptuous attitude, but shouldn't we believe in our own talents and abilities? Seriously; we must believe that our work comes to good, is important to other people, and is worth every second of effort.

The Materials I Use

I'm quite often asked (especially on YouTube) what materials I use, so the person asking can go right out and buy all the stuff at once. It's not really that simple. The materials I prefer may not be what someone else would choose, but I guess it's somewhere to start if you really have no idea about what you should get.

 I have used quite a few clays in my creative travels, but I didn't find a favourite until I came across Chavant, medium hard grade. This clay has been my mainstay, as well as the choice of many a sculptor in the FX business. But I have actually found something I like even more: Monster Maker's "Monster Clay". This stuff is very firm until you warm it, either by putting it in your microwave oven for a short while, or (as I do) by simply using a heat gun on it. You can melt it down to a puddle if you choose, and while it's soft you can slap together large rough shapes. As it cools you're able to work lots of minute detail into the clay, and you can handle your sculpture quite roughly without squashing it.

I use a variety of sculpting tools, but the ones I'm holding up here are my three most effective. The red one on the right is home-made, using an old brush handle and simple steel wire epoxied in place. I use this tool to work in both larger and smaller details. The middle tool has two hard rubber points, which are very useful for creating soft, but defined shapes. The larger loop tool to the left is used to smooth out the shapes made by the other two tools, and also to create larger shapes.
To soften the shapes further I put some Vaseline (petroleum jelly) on a finger, and rub it over the clay. I also have texture stamps made by applying latex or firm silicone rubber over surfaces with interesting textures, like bumpy plastic displays in cars or various fruit. I seldom use them nowadays, but these flexible texture stamps are a quick way to add interesting surface detail to your sculpture.

I use only really hard plaster, mostly some brand of dental stone. Hobby plaster will deteriorate very quickly, and if you plan to re-use your plaster moulds for new projects, you'll find that they won't hold up for very long. In short, buy your plaster from a dental supply shop, which is easy to find online. I keep all my plaster in a big plastic container, with a tight snap-on lid to keep dust and moisture out.

Latex can be considered a fairly primitive material now, but it's also one of the most reliable and cost-effective. I really should get on with using silicone for my puppets and masks, but I still find latex far more enjoyable and easy to work with. You can also find it at lots of places, from sculpture shops to hobby shops.
I often mix the latex with other materials, mostly cotton, to add volume. But it's important to remember to never add a cotton/latex mix to an area of the puppet which needs to be soft and bendable.

 For my puppet skeletons I only use aluminum wires of varying thickness. I have used advanced ball & socket metal armatures as well, but I often find them lacking in some aspect, mostly regarding movability. Aluminum wire allows you to bend your puppet's limbs in any direction, until the material covering the wire and padding the body can't be compressed any more, and starts to spring back.

To create the "bones" or the hard parts of the wire armature I use Friendly Plastic thermoplastic. This material is brilliant, and I've been using it for years for all sorts of things. I've made entire sword handles from it, as it's very sturdy. You melt these plastic strips with a heat gun, and if you have to re-do something, just melt the stuff again and again.

I pad the bodies of my puppets with the softest urethane foam I can find, which I simply collect from old cushions and mattresses. I piece together the foam bits using a brand of contact cement, which I believe is manufactured in Sweden. The Casco contact cement is yellow, smelly and dries to a strong flexible bond. It's perfect for puppet work, and I also use it for many other types of projects.
Master animator and puppet builder Jim Danforth recommends a brand called Pliobond.

This is my trusty Black & Decker heat gun. I've had it for over 10 years now, and it hasn't failed me yet. It's a real workhorse. I use it to quickly dry latex in a plaster mould, to dry paint, to soften the Monster Clay and melt the Friendly Plastic. It's an invaluable tool for me.

When I paint the rubber skins of my puppets and masks I use either latex tinted with Kryolan tinting powders or Universal tinting liquids, or I sponge on PAX paint; a mix of Prosaide make-up glue, and acrylic paints. There's a type of Prosaide formulated especially for making PAX, called No-Tack, which means it doesn't have the stickiness of normal Prosaide.
But when the base paint is dry I attack my subject with an airbrush, in my case the Iwata HP-C double action airbrush pen. I can't say if this model is still available, but it's another little tough guy, very precise and easy to clean. I use a small air compressor specifically made for airbrush work.

I've used a variety of airbrush inks. Right now I'm into the Liquitex line of airbrush acrylics. I only use airbrush paints that are water-based. Cleaning up your pen can be a real hassle otherwise.

Moving on to other materials, which I use for prop-making. I've found that the Dragon Skin FX-Pro silicone from SmoothOn is ideal for making soft, elastic moulds in which you cast plastic or plaster items. These moulds last forever, the materials are easily mixed on a 50/50 ratio, and the silicone sets up fast -within about 45 minutes you have a usable mould.
I've also made masks and puppet parts out of Dragon Skin FX-Pro, and there are many ways you can vary the softness of the silicone using additives. I can also recommend PlatSil Gel 10, which is another easy to use silicone ideal for both moulds and mask/puppet projects.

The material I use more than any other for casting props, fake jewellery, puppet armature skulls, etc, is SmoothOn's Smooth-Cast 325. It's another 50/50 ratio mix material, and it can be tinted with other SmoothOn products. Smooth-Cast 325 is ideal for "roto casting", which means that it sets on the inside of your silicone mould if you start to turn it. In other words, you can cast hollow objects of almost any size -from tiny puppet parts to big monster skulls. This plastic also sets very quickly.
Sometimes I use Smooth-Cast 65D, which is more elastic, and therefore able to take a bigger beating.

Are these material expensive, then? Well, the SmoothOn products cost a bit, but are worth every penny. The Monster Clay is also quite pricey, but other than that you won't have to spend an arm and a leg tooling up for your first puppet or mask project.